Delta Manual

AIPTEK PenCam 2

Switching the camera on

Pressing the SW2 when the LCD is blank will power on the camera. The camera will automatically power off after 30 seconds of inactivity. The LCD indicates the camera mode either “Lr” for low resolution (QVGA images) or “Hr” for high resolution( VGA images). The LCD then displays the number of pictures you have remaining.

Self Timer

Pressing the mode button until “St” appears in the LCD then pressing the shutter button will start a 10 second self-timer. The camera will issue a short beep every second and then a longer beep. The next beep indicates that the picture has been taken. Note: The self-timer can not be selected when the camera is full.

Clearing the stored images

Press the mode button until CL appears on the LCD. Pressing the shutter button once will cause the camera to beep and the CL will start flashing. Pressing the shutter button again within 5 seconds will clear the camera and reset the picture counter.

Changing the picture resolution

Picture resolution may only be changed when the camera memory is empty. If any pictures have been taken then the memory must first be cleared. To change resolution press the mode switch until the resolution option is displayed, either Hr to change to high resolution mode (if you are currently in the low resolution mode)or Lr to change to low resolution(if you are currently in the high resolution mode). The camera will beep and the display will reset to indicate the number of pictures available.

Download AIPTEK PenCam 2 Digital Camera Manual

Related Posts

AIPTEK PocketCam Classic Switching the camera on Pressing the SW2 when the LCD is blank will power on... 

AIPTEK PenCam Trio Additional features Pressing the mode switch repeatedly cycles through additional... 

AIPTEK PenCam VR System RequirementsMicrosoft Windows X P / 98 / ME/ 2000 Pentium 200 MHz (or equivalent)... 

AIPTEK PenCam Mega 1.3 Playing picture You can play any picture file you want by double clicking the... 

AIPTEK PocketCam 1.3 MegaCam Manager Installation Place the CD into your CD-ROM and click on the MegaCam...