Delta Manual

Alesis MultiMix 8 Line

MAIN EXPAND IN and OUT jacks

You can chain together as many MultiMix8Line mixers as you like by connecting the MAIN EXPAND OUT jack of mixer A into the MAIN EXPAND IN jack of mixer B. Continue connecting additional mixers in similar fashion (OUT B into IN C, OUT C into IN D, etc.). Use a stereo (TRS) cable for these connections. The final mixer in the chain will control the MASTER volume for all of the devices connected to all the mixers. Connect the final mixer in the chain to your output device (amplifier, powered speakers, main mixer, etc.) via the MAIN OUTPUT jacks.

STEREO MONITOR OUTPUT

This is an additional, unbalanced output that you can connect to a headphone amplifier, auxiliary recorder, or other device. This signal is tapped AFTER the MASTER volume knob: its level follows the MASTER volume setting.

To connect the STEREO MONITOR OUTPUT to stereo equipment with separate Left and Right inputs, use a TRS-to-dual-TS 1/4″ cable. A standard “Insert” cable, available from your audio dealer, is ideal for this application. Connect the TRS (stereo) plug to the MultiMix8Line. Then, connect the two separate TS (mono) plugs to the target device, “Tip” signal Left and “Ring” signal Right.

STEREO EFFECTS SEND and RETURN

Connect a reverberation unit (such as the Alesis MidiVerb4) or other effects processor to these jacks in order to add effects to your mix. Connect the input INTO your effects processor to the EFFECTS SEND jacks. Connect the output FROM your effects processor to the EFFECTS RETURN jacks. If you are using a mono effects processor, connect only the LEFT (MONO) jacks of the MultiMix8Line. Using the LEFT (MONO) jack only, the effects return will be heard through both LEFT and RIGHT output channels.

MAIN OUTPUTS

Connect the MultiMix8Line to its destination output device (amplifier, powered speakers, main mixer, etc.) using the main outputs. These are balanced jacks, so use TRS cables for best results. The MAIN OUTPUT level is controlled by the MASTER volume knob on the front panel.

Download Alesis MultiMix 8 Line Quick Start Guide

Related Posts

Alesis iMultiMix 9R CONNECTING ELECTRIC GUITARS AND BASSES Electric guitars and basses can be connected... 

Alesis MultiMix 16 USB 2.0 How to Use This Manual This manual is divided into the following sections... 

ButtKicker LFE Quick Start How to Determine How Many Isolators You Will Need Rubber isolators come in... 

Alesis iMultiMix 8 USB About the iMultiMix 8 USB The iMultiMix 8 USB mixer is the latest in the large... 

Crest X-Rack XR-24 This owner’s manual covers both the XR-20 and the XR-24 XRack mixers. Features are...