Altec Lansing inMotion iM3cBLK Speaker User’s Manual



Altec Lansing inMotion iM3cBLK Speaker User's Manual

Auto Shut-down (Standby)

During battery-only operation the inMotion iM3 system automatically shuts down/goes into standby mode if no audio is detected within two minutes. While this mode reduces battery consumption, it does not completely turn the iM3 off. To maximize battery life when not using the iM3, turn the power switch located on the back of the unit to the “Off” position. NOTE: The Auto Shut-down (Standby) feature is active during battery-only operation. If the AC wall adapter is used, the iM3 will remain on as long as the power switch is in the “On” position.

Connecting to alternate audio source

The inMotion iM3 system includes an auxiliary input jack that allows you to connect to alternate audio sources, such as non-dockable iPods, CD players, MP3 players, portable DVD players, and laptops. To connect the iM3 to an alternate audio source, follow the steps below.

  1. Locate a 3.5 mm stereo cable (not included).
  2. Connect one end of the 3.5 mm stereo cable into the auxiliary input jack (AUX) located on the back of the inMotion iM3 system, and the other end to the headphone or line out jack on your alternate audio device.
  3. Set the volume on the audio source at mid-level.
  4. Set the volume on the inMotion iM3 at minimum level and adjust upward to a comfortable listening level

Volume

The “+” and “–” buttons on the front of the inMotion iM3 system are the master volume controls for the speaker system. Press and hold the “+” button to increase the volume and the “–” button to decrease the volume.

Download Altec Lansing inMotion iM3cBLK Speaker User’s Manual


Related Posts

Altec Lansing M604 Speaker User’s Manual

Treble and Bass To control treble or bass levels, press the “TREBLE” or “BASS” buttons on the... 

Altec Lansing inMotion iM5 Speaker User’s Manual

Connecting to alternate audio source Connect an alternate audio source — such as a non-dockable iPod,... 

Altec Lansing M602 Speaker User’s Manual

Assembling the INMotion IM510 Open the inMotion iM510 docking bay by pushing the button located on the... 

Altec Lansing inMotion iMT1 Speaker User’s Manual

Power Use one of the following two options to power your inMotion iMT1: AC (Wall outlet) Power Insert... 

Altec Lansing inMotion iM4 Speaker User’s Manual

DC (Battery) Power Install four AA batteries (not included) into the battery compartments on the bottom... 

Tags: , altec lansing inmotion im3cblk, altec lansing im3cblk, altec lansing inmotiom speakers im3, altec lansing im3 manual, im3cblk, altec lansing inmotion im3 manual, inmotion ipod im3cblk user manual

No Responses to “Altec Lansing inMotion iM3cBLK Speaker User’s Manual”

Leave a Reply