Delta Manual

Face the bracket of the Xonar D2 audio card towards the back panel of your computer and insert the audio card gently into an available PCI slot. Make sure it’s completely inserted into the PCI slot. (Warning! Do not force the audio card into the slot. Make sure that the gold points of the card’s PCI connector are aligned with the motherboard’s PCI connector before you insert the card into the PCI slot. If it does not fit properly, gently remove it and try again.)

If you would like to use the physical playback buttons on your CD-ROM drive to control audio CD playback on your PC, you need to connect the analog cable between the CD-ROM drive and the audi0 card. Otherwise, you can just skip this section and use ordinary digital CD playback on windows.

Connect the CD-IN 4-pin header to the analog output on the back of your CD/DVD-ROM drive with the audio CD cable which is usually included with CD/DVD-ROM drive.

For optimum TV audio quality, Xonar uses ADC recording to digitize the signal and loops it back to DAC playback. Please select Aux-in as the recording source in the Xonar Audio Center’s recording mixer and enable the monitoring button to pass effects such as Pro-Logic IIx to expand the stereo TV audio to 5.1 or 7.1 channel surround sound. TV audio on your PC will become even better than on your TV set!

Connecting Digital Speaker Systems (Home Theter)

The Xonar D2 support Dolby Digital Live and DTS interactive technologies, which trans code any audio, including games and music, into industry-standard Dolby Digital or DTS 5.1 surround bit-stream. This makes playback through your home theater system possible, creating an immerse and impressive cinema surround sound experience.

Download ASUS Xonar D2 Audio Card User’s Manual

Related Posts

The Link.USB Interface The Link.USB interface provides two analog audio inputs that can accept microphone... 

Philips MX5600D-37 Home Theater Avoid high temperatures, moisture, water and dust Do not expose the system,... 

Using the remote control unit Use the remote control unit by pointing it towards the remote control... 

Connecting the Link.MIDI 4×4To stand the Link.MIDI 4×4 upright, pull the stabilizer bar... 

Philips MX5500D/37 You only need to make one video connection from the following options, depending on...