Delta Manual

Azden FMX-20

To power the FMX-20 with an external power supply. (Note: The FMX-20 does not come with an external power supply. An optional power supply part number BC-26U is available from the Azden parts department. Call 516-328-7500 for details. If you use a different power supply make sure its output does not exceed 12 volts or you may damage the unit.) Move the power switch (1) to EXT position. The POWER ON LED (2) will turn green. When not in use turn the mixer OFF and disconnect the power supply from the mixer.

MONITOR SELECTOR SWITCH (#9)

Normally, set the MONITOR selector (9) to position L/R. In the L/R position you will monitor the sound of all connected microphones using either stereo or mono headphones. If you only want to hear the output from CH L, use stereo headphones and set the switch to position L. Or, if you only want to hear the output from CH R, use stereo headphones and set the switch to position R.

UNBALANCED OUTPUT (16)

This output is stereo (dual-channel). It is recommended to use a stereo-to-stereo mini cable (not supplied) from the UNBALANCED OUTPUT (16) to the mic or line input of your video camera or audio recorder. The UNBALANCE OUTPUT (16) is designed for video cameras or audio recorders, which have mini-jack microphone or line inputs.

Because the FMX-20 has low-impedance XLR inputs and a mini-plug output, users of mini DV cameras that have mini-plug microphone inputs can now use high-quality microphones with XLR outputs. For a more detailed description on how the UNBALANCED OUTPUT (16) works see OUTPUT SELECT above.

LIMITER SWITCH (8)

After setting the Input Levels, turn this switch to ON. The limiter circuit reduces possible overload distortion from very loud sound levels without affecting normal sound levels. If you prefer the overall sound quality of the mixer without the limiter circuit engaged leave the switch OFF.

Download Azden FMX-20 Portable Mixer Instruction Manual

Related Posts

Azden FMX-42 Battery Power: Make sure the mixer is turned “OFF” (2). Remove the battery cover (1)... 

Azden FMX-32 LOADING THE BATTERIES: Make sure the mixer is turned OFF. Remove the battery cover (A) by... 

Alesis MultiMix 8 Line MAIN EXPAND IN and OUT jacks You can chain together as many MultiMix8Line mixers... 

Alesis iMultiMix 8 USB About the iMultiMix 8 USB The iMultiMix 8 USB mixer is the latest in the large... 

Crest Century Series GTX Insert Send This 1/4-inch jack is used for sending a post-input preamp, post...