BBE DI-1000 Direct Box Owner’s Manual
Power Source – Connect the appliance to a power supply only of the type described in the operating instructions or as marked on the appliance.
Power-Cord Protection – Route the power cord so that it is not likely to be walked on or pinched by having objects placed on it,paying particular attention to the plugs,receptacles,and the point where the cord exits from the appliance.
Grounding or Polarization – Do not defeat the grounding or polarization feature of the AC power cord.If your AC receptacle will not accept the power cord plug,contact your electrician to install a proper AC receptacle.This manual will help you to effectively utilize the BBE DI-1000. Reviewing the information contained in this manual will answer most of the common questions that our service department receives. If you still have questions, please feel free to call 800-233-8346.
ACTIVE/PASSIVE SWITCH
In the Passive position, the instruments signal is routed straight from the input to the Jensen transformer and then directly to the XLR output. This is a strictly passive, impedance-match only mode. In this mode, the Sonic Maximizer function is not available.
Related Posts
- BBE DI-100 Active DI Owner’s Manual
IMPORTANT Before you begin, please check the contents within this box to insure that included are: The...
- Invacare At`m Power Wheelchair Owner’s Manual
Controller Settings/Repair or Service Set-up of the Electronics Control Unit is to be performed only...
- Avanti IM3202SS Icemaker Owner’s Manual
INSTALLATION OF YOUR APPLIANCE This appliance is designed to be recessed or built-in (fully recessed). Place...
- Avanti WD29EC Dispenser Owner’s Manual
Avanti WD29EC Dispenser Plug the appliance into an exclusive properly installed-grounded wall outlet....
- Avanti IMP25 Icemaker Owner’s Manual
Installation Of Your Ice Maker Locate the ice maker away from direct sunlight and sources of heat (stove,...
No Responses to “BBE DI-1000 Direct Box Owner’s Manual”