Delta Manual

With the Base Frame Assembly (from Step 1) on the floor, center the Lower Lat Tower Assembly over the Rear Cross Bar (Item #4), as shown in Figure 3. Place the Lower Lat Tower onto the bracket on the Rear Cross Bar

Insert the Seat Support Rail (Item #7) into the bracket on the Standing Platform (Item #1) and line up the connector at the top of the Seat Support Rail with the bracket on the Lower Lat Tower (Item #5), as shown in
Place (1) 3/8″ Washer (Item #O) over the end of (1) 3/8″ X 5″ Hex Head Bolt (Item #I), and slide the bolt through the upper bolt hole in the Left Squat Frame Rail, Seat Rail and Right Squat Frame Rail, as shown in Figure 5. Place (1) 3/8″ Washer (Item #O) and (1) 3/8″ Nylock Nut (Item #R) over the end of the bolt to secure it.

Then, place (2) 3/8″ Washers (Item #O) over the ends of (2) 3/8″ X 3/4″ Hex Head Bolts (Item #G) and attach the Squat Frame Rails more securely by screwing these through the lower holes in the Squat Frame Rails and Seat Rail.

Download Now

Related Posts

SQUAT PLATFORM & FRAME ASSEMBLY Locate the following parts for this step:Large plastic squat platform... 

Basic Assembly Principles Here are a few basic tips that will make your assembly of the Bowflex Xtreme®... 

Basic Assembly Principles Here are a few basic tips that will make your assembly of the Bowflex Xtreme®... 

Select where you are going to locate your Bowflex Ultimate® 2 home gym carefully. The best place for... 

Before beginning any exercise program consult your physician or health care professional. Only he or...