Delta Manual

Brother HL-1050

Remote Printer Console Program for DOS

The utility program, Remote Printer Console (RPC), is available on a floppy disk supplied with your printer. When you operate your computer in the DOS (Disk Operating System) environment, this program allows you to easily change the default settings of the printer such as fonts, page setup, emulations and so on.

This program also provides a status monitor program, which is a Terminate-and-Stay Resident (TSR) program. It can monitor the printer status while running in the bacground and report the current status or errors on your computer screen.

Two Side Printing (Manual Duplex)

The supplied printer driver for Windows 95/98 or Windows 3.1 enables manual duplex printing. For more information about settings, see the help text in the printer driver.

The printer prints all the even numbered pages on one side of the paper first, and then prints all the odd pages on the reverse side of the paper. When you have finished printing the even numbered sides of the paper, the diver instructs you to re-insert the paper by a pop-up message on the computer screen. follow the instructions on how to reinsert the paper.

When you load more than one sheet of paper manually:

Open the Setup dialog box of the supplied Windows printer driver and choose Manual Feed in the Paper Source section. Follow the above instructions to load the first page. The printer automatically starts printing. After the first page is printed, the dialog box appears and prompts you to load the next page. Repeat these steps until you have finished printing all the pages.

Download Brother HL-1050 Printer User’s Manual

Related Posts

Brother HL-1040 Remote Printer Console Program for DOS The utility program, Remote Printer Console (RPC),... 

Brother HL-1440 Using both hands, insert the paper into the manual feed slot until the front edge of... 

Brother HL-1250 How to replace the Toner Cartridge When the Standard Capacity toner cartridge is used,... 

Using the MP TrayOpen the MP tray cover. Pinch the knob and paper guide together, then slide the right... 

Laser Safety (For 110–120 V Model Only) This printer is certified as a Class I laser product under...