Delta Manual

Laser Safety (For 110–120 V Model Only)

This printer is certified as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.

This means that the printer does not produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.

FDA Regulations (For 110-120 V Model Only)

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One of the following labels on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States.

IMPORTANT – For Your Safety

To ensure safe operation the three-pin electrical plug supplied must be inserted only into a standard three-pin power point which is properly grounded through normal household wiring. Extension cords used with the equipment must be three-pin plug type and correctly wired to provide proper grounding.

Incorrectly wired extension cords may cause personal injury and equipment damage. The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, consult a qualified electrician.

Remote Printer Console Program for DOS

The utility program, Remote Printer Console (RPC), is available on a floppy disk supplied with your printer. When you operate your computer in the DOS (Disk Operating System) environment, this program allows you to easily change the default settings of the printer such as fonts, page setup, emulations and so on.

This program also provides a status monitor program, which is a Terminate-and-Stay Resident (TSR) program. It can monitor the printer status while running in the background and report the current status or errors on your computer screen.

Download Brother HL-1060 Printer User’s Manual

Related Posts

Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21... 

Brother HL-1040 Remote Printer Console Program for DOS The utility program, Remote Printer Console (RPC),... 

Brother HL-1050 Remote Printer Console Program for DOS The utility program, Remote Printer Console (RPC),... 

Laser Safety This printer is certified as a Class 1 laser product under the U.S. Department of Health... 

Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Monotype Imaging...