Jun - 25 - 2009 @ 9:32 am |
No comments
Precautions on safety
Avoid excessive heat and humidity. Do not expose the PD-6 to extremes of humidity. Do not place the unit in direct sunlight, close to heating units, or in areas subject to high...
Jun - 25 - 2009 @ 9:22 am |
No comments
<Accessing the “Add Machine ID” item>
While the unit is stopped, press the [SHIFT] key followed by the [ENTER/YES] key to enter the MENU mode. Highlight “SYS SETUP” and press...
Jun - 25 - 2009 @ 9:13 am |
No comments
When supplying the power to the unit from the AC power outlet, only use the supplied AC adaptor. If you use any other AC adaptor, the unit may not work correctly and there is a serious risk of damage...
Jun - 25 - 2009 @ 9:03 am |
No comments
Do not let water or other liquid, or metal objects such as pins, accidentally enter the inside of the unit (especially inside of the card slots) because this may lead to electric shock or damage. Should...
Jun - 25 - 2009 @ 8:52 am |
No comments
Realtime clock setting
The realtime clock is built in the DV824. The realtime clock data is used for date/time of creation of a file. By default, the realtime clock is set according to local date/time...
Jun - 25 - 2009 @ 8:43 am |
No comments
Before using the DV40
Before using the DV40, you must carry out some preparations. This chapter describes how to set the internal clock, as well as details about formatting a DVD-RAM disk, including UDF...
Jun - 25 - 2009 @ 8:38 am |
No comments
Supporting two recording formats
The CR500 supports both the BWF (Broadcast Wave Format) and CD-DA (Compact Disc Digital Audio) formats as recording formats of CD-R/RW discs. You can record WAV audio...