
Teac PD-H300mkIII CD Player Owner’s Manual
Copy-protected discs and other discs that do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC Corporation and its subsidiaries cannot...
Download manual handbook guide

Copy-protected discs and other discs that do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC Corporation and its subsidiaries cannot...

If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely,...

Finalizing Although audio data may be written on a CD-R or CD-RW disc, a standard CD player will not be able to play back the audio until a final table of contents (TOC) has been written at the start...

MaintenanceIf the surface of the unit gets dirty, wipe with a soft cloth or use diluted mild liquid soap. Never spray liquid directly on this unit. Apply your cleaner to your cleaning cloth and wipe...

Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or...

Power LED The blue power LED illuminates when the KAV-250cd/2is in the operational mode. The power LED also flashes when any remote control key is pressed RC-5 In The KAV-250cd/2is equipped with an RC-5...

Power Cord Do not place the unit, a piece of furniture, etc., on the power cord (main lead), or pinch the cord. Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never...

DIGITAL OUTPUTSThe KAV-300cdis equipped with one EIAJ fiber optic ( To slinkĀ ) and one S/PDIF coaxial digital output. The toggle switch on the rear panel must be set to the ON position in order to...
HD formats can be either progressive (p) or interlaced (i). Progressive means each time the image refreshes (60 times a second for NTSC, 50 times a second for PAL) the video signal contains the full resolution....

Single-ended A two-wire input or output circuit. Use care when using single-ended connections as the ground connection is made last and broken first. Tum the system off prior to making or breaking single-ended...