
Crest X-Rack XR-24 Manual
Crest X-Rack XR-24 This owner’s manual covers both the XR-20 and the XR-24 XRack mixers. Features are identical for both models, the only difference is the amount of Mono Inputs versus Stereo Inputs....
Download manual handbook guide

Crest X-Rack XR-24 This owner’s manual covers both the XR-20 and the XR-24 XRack mixers. Features are identical for both models, the only difference is the amount of Mono Inputs versus Stereo Inputs....

Crest X-Rack XRM When the switch is depressed, a Pad is inserted into the signal path and the input preamp circuit is set up to accept a line-level signal from either the XLR mic-input connector or the...

Crest X-VCA polarity reverse—ø This feature is used for correcting or minimizing polarity and phase related errors. For example, occasionally a balanced input connection is reverse-wired before it gets...

Crest X-Monitor Format This manual uses a format that is intended to be easy to read, yet technical for those who need to know all the details. For feature descriptions, this is done by devoting the left...

Crest Century Series TC Power Requirements The Century Series power supplies have certain electrical requirements to operate properly. If possible the power supply should be connected to a dedicated circuit....

Alesis iMultiMix 9R CONNECTING ELECTRIC GUITARS AND BASSES Electric guitars and basses can be connected to the ¼” inputs as well. The combination of the [TRIM] control and the fared level on the front...

Alesis MultiMix 8 Line MAIN EXPAND IN and OUT jacks You can chain together as many MultiMix8Line mixers as you like by connecting the MAIN EXPAND OUT jack of mixer A into the MAIN EXPAND IN jack of mixer...

Azden FMX-32 LOADING THE BATTERIES: Make sure the mixer is turned OFF. Remove the battery cover (A) by pressing in the clip, then lift up and remove the cover from the unit. Install 6 new “AA” ALKALINE...

Crest Century Series GT Comprehensive Talk back section allows access to all primary console outputs. Additional access provided to an external location such as an on-stage monitor mixer system. External...

Crest Century Series GTX Insert Send This 1/4-inch jack is used for sending a post-input preamp, post Hi Pass Filter, pre-EQ signal to an outboard processor. The signal at this jack is unbalanced and always...