
Aug - 15 - 2010 @ 6:06 am |
No commentsAzden FMX-42 Battery Power: Make sure the mixer is turned “OFF” (2). Remove the battery cover (1) by pressing the clip in and then lifting up and removing the cover from the unit. Install 6 fresh “AA”...

Aug - 15 - 2010 @ 6:06 am |
No commentsAlesis MultiMix 16 USB 2.0 How to Use This Manual This manual is divided into the following sections describing the various functions and applications of the MultiMix consoles. While it’s a good...

Aug - 09 - 2010 @ 8:37 am |
No commentsAlesis iMultiMix 8 USB About the iMultiMix 8 USB The iMultiMix 8 USB mixer is the latest in the large family of Alesis audio mixers. We’ve come a long way since the 1622 mixer we first built in 1989....

Aug - 09 - 2010 @ 8:35 am |
No commentsAzden FMX-20 To power the FMX-20 with an external power supply. (Note: The FMX-20 does not come with an external power supply. An optional power supply part number BC-26U is available from the Azden parts...

Jun - 18 - 2010 @ 10:21 am |
No commentsCrest Century Series LM Ground Linking Safety Considerations – Each new power supply is shipped with the AC third wire ground connected to the console chassis ground. The connection is made at the...

Jun - 18 - 2010 @ 10:21 am |
No commentsCrest Century Series LMX Power Requirements The Century Series power supplies have certain electrical requirements to operate properly. If possible the power supply should be connected to a dedicated circuit....

Jun - 18 - 2010 @ 10:21 am |
No commentsCrest X-Four (X4) EQ features Many audio signals coming into the console require some degree of corrective eq in order to be part of a good sounding mix. The input e consists of four-bands: high, high-mid,...

Jun - 18 - 2010 @ 10:21 am |
No commentsCrest Century Series VX True Post Effect Sends This section will examine what happens to the effect (Aux) sends when the Audio Subgroups are used as in the example above. In this example, Aux 1 is used...

May - 27 - 2010 @ 1:13 am |
No commentsCrest HP-Eight (HP-8) polarity (reverse) This feature is used for correcting or minimizing polarity and phase related errors. For example, occasionally a balanced input connection is reverse-wired before...

May - 27 - 2010 @ 1:13 am |
No commentsCrest X-Eight HS aux send features Eight auxiliary AUX SENDS are available for creating individual output mixes. These mixes can be used for driving effects processors, providing monitor mixes, creating...