
Apr - 05 - 2010 @ 6:12 am |
No commentsNautilus EV716 Pro Series Elliptical Moving Your Machine This machine is very heavy and awkward and requires two people to safely move from one location to another. To move, have two people lift up the...

Apr - 05 - 2010 @ 6:12 am |
No commentsNautilus EV716 Pro Series Elliptical Assembly NOTE: Right and left side covers are interchangeable. One side of machine will use one screw on the outside of the cover and three on the inside, while the...

Apr - 05 - 2010 @ 6:12 am |
No commentsNautilus Commercial Series TreadClimber TC916 Service If the treadles still do not come to a locked position, then check the treadle center position on the encoder PCB, as follows:Remove the rear step....

Apr - 05 - 2010 @ 6:12 am |
No commentsNautilus Commercial Series TreadClimber TC916 Understanding the Display and Controls The TreadClimber® console display is a computerized panel used to operate the TreadClimber® exercise machine and see...

Apr - 02 - 2010 @ 3:43 pm |
No comments Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps...

Apr - 02 - 2010 @ 3:43 pm |
No comments A scale is provided at the bottom of every assembly instruction page. Use this scale to identify the correct size bolts and spacers. The head of a bolt is not used in measuring the length of a bolt. Install...

Apr - 02 - 2010 @ 3:42 pm |
No comments A black 6-inch scale with white numbers is provided at the bottom of every assembly instruction page. Use this scale to identify the correct size bolts and spacers. The head of a bolt is not used in measuring...

Sep - 15 - 2009 @ 3:51 pm |
No comments Route the Cable and Attach the Pulley As you route the cable through the pulleys on the Multi-Hip Option, wrench tighten the fasteners on each pulley as you go. Make sure that the cable slides freely...

Sep - 09 - 2009 @ 12:35 pm |
No comments Leave room for adjustments Tighten fasteners (such as bolts, nuts, and screws) so that the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly...

Sep - 09 - 2009 @ 12:35 pm |
No comments Unpacking the Equipment The S3.45 is carefully tested and inspected before shipment. Pacific Fitness ships the unit in several pieces that require assembly. Ask for assistance during the assembly process.Review...