Delta Manual

E-MU Tracker Pre USB

Uninstalling all Audio Drivers and Applications

At times you may need to uninstall or reinstall the Tracker Pre USB 2.0 application and device drivers to correct problems, change configurations, or upgrade outdated drivers or applications. Before you begin, close the E-MU Audio control application. Applications running during the installation will not be removed.

1. Click Start -> Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Click the Install/Uninstall tab (or Change or Remove Programs button).
4. Select the E-MU Audio Drivers entry and then click the Change/Remove button.
5. In the Install Shield Wizard dialog box, select the Remove ALL option.
6. Click the Yes button.
7. Restart your computer when prompted.

You may now re-install existing or updated E-MU device drivers or applications.

Setup the MIDI Devices

If you plan to use a MIDI keyboard, now would be a good time to set up your MIDI devices. Connecting a MIDI keyboard will allow you to use the virtual instruments provided in the software bundle and get the most out of your purchase. You’ll also need a MIDI interface such as the E-MU Xmidi 2×2 or Xmidi 1×1.

USB

Connects the Tracker Pre to your computer via the supplied USB cable. The USB connection provides two-way communication when connected to the computer.

Since the Tracker Pre receives its power from the USB, always connect to the USB jack on the computer itself and NOT to a low-power USB connection that may be present on your computer keyboard or other USB peripheral.

Stereo Mic Input

This 1/8” mini-phone jack is designed to accept a stereo, electric condenser microphone. The jack supplies +5VDC phantom power. Mono microphones can also be connected and will use input 1L.

Download E-MU Tracker Pre USB Manual

Related Posts

E-MU xMIDI 2x2 Setting up the Xmidi 2×2 Connect the Xmidi 2×2 to your computer using the supplied... 

E-MU xMIDI 1x1 Mac OS X In most audio applications, the Xmidi 1×1 ports should appear as the name... 

Connecting the Link.MIDI 4×4To stand the Link.MIDI 4×4 upright, pull the stabilizer bar... 

TASCAM US-122L USB Installation Because the US-122 is a USB device, connection is straightforward. Simply... 

E-MU 0404 USB Note About Windows Logo Testing When you install the 0404 USB 2.0 drivers, you will see...