Delta Manual

Euro-Pro 1100 Dressmaker II

The Sewing Machine Stops Sewing

Very heavy fabric or too many layers of fabric will force the sewing machine to stop. Thread is tangled in the lower bobbin. Stop the machine. Cut the tangled threads to clear it from the machine. Re-thread both the bobbin and the needle.

Poor quality stitching: refer to “Adjust Thread Tension”. When new batteries are installed, the sewing machine should work for approximately 2 hours under normal sewing conditions. Remember that heavy fabric requires more power, so it will reduce the running time of the batteries.

Hold the end of the upper thread with the left hand, and turn the hand wheel slowly anti-clockwise until the needle goes down and up again to its highest position. Pull the upper thread slowly and the lower threads to the back and place them together under the presser foot.

Battery Installation

1. Battery compartment is on the bottom of sewing machine.
2. Open the cover of battery compartment and place 4″AA”alkaline battery as the diagram provided. Make sure the batteries are in the right polarities marked on the machine.
3. Replace the cover.

Caution: Make sure that the power switch is in the OFF position when changing the batteries. If you install the batteries when the power is ON, the machine may run suddenly.

Stitch Length Adjustment

Before sewing your item, test for the correct stitch length, using a piece of fabric. The machine can provide three-stitch length. As shown in the figure, when the dial is adjusted in the position 1, the stitch is in shortest. When the dial is at the position 3. the stitch length is in its longest position. Normally we suggest you to adjust it in the position.

Download Euro-Pro 1100 Dressmaker II Sewing Machine User’s Manual

Related Posts

Euro-Pro Dressmaker 998B Make sure that the power switch is in the ‘OFF’ position. Insert the batteries... 

Euro-Pro 8660 Lower Thread tension To test the bobbin thread tension, remove the bobbin case and bobbin... 

Euro-Pro 7500XH Lower Thread Tension To test the bobbin thread tension, remove the bobbin case and bobbin... 

Euro-Pro 9105 Polarized plug information This appliance has a polarized plug (one blade wider than the... 

Automatic Power Head Height Adjustment. Based upon the resistance of the brush roller against the floor,...