Delta Manual

Euro-Pro Dressmaker 998B

Make sure that the power switch is in the ‘OFF’ position. Insert the batteries with the polarities in the correct position as indicated on the machine or connect the AC/DC adapter plug into the AC/DC receptacle on the right side of the machine. Connect the foot control into the foot control receptacle.

CHANGING THE NEEDLE

1. Raise the needle to its highest position.
2. Hold the needle and loosen the needle clamp screw. Then remove the old needle.
3. Insert the new needle into the clamp with the flat side facing away from you, toward the rear of the machine. The eye of the needle should be facing the front of the machine. Push the needle up into the needle clamp as far as it will go.
4. Tighten the needle clamp screw.

Test the stitch tension on a scrap piece of the same fabric you are going to use. When the thread tension is properly adjusted, the upper and lower threads tension is equal and strong enough to lock
both threads in the center of the material.
DRAWING UP THE BOBBIN THREAD

1. Raise the presser foot
2. Hold the upper thread loosely and turn the hand wheel clockwise until the needle comes down and comes up again to its highest position.
3. Lightly draw the needle thread forming a loop with the bobbin thread. The upper thread should have caught the lower thread in a loop.
4. Pull the needle thread toward you and the lower thread will come up from the lower bobbin in a large loop. Pull both threads to the back of the needle and slid the bobbin case cover into place. You are now ready to start sewing or mending

Download Euro-Pro Dressmaker 998B Sewing Machine User’s Manual

Related Posts

Euro-Pro 1100 Dressmaker II The Sewing Machine Stops Sewing Very heavy fabric or too many layers of fabric... 

Euro-Pro 8660 Lower Thread tension To test the bobbin thread tension, remove the bobbin case and bobbin... 

Euro-Pro 7500XH Lower Thread Tension To test the bobbin thread tension, remove the bobbin case and bobbin... 

Euro-Pro 9105 Polarized plug information This appliance has a polarized plug (one blade wider than the... 

DW Drum 9900 (9999) Tom Stand Straight/Boom Casting DW’s Straight/Boom Casting utilizes an exclusive...