Delta Manual

Before using the DV40

Before using the DV40, you must carry out some preparations. This chapter describes how to set the internal clock, as well as details about formatting a DVD-RAM disk, including UDF format details, format modes (”Normal mode” and “Tape mode”) and audio file types (”BWF” and “SDII”). Read this chapter first before using the DV40.

Time code recording

This chapter describes how to record SMPTE/EBU time code to the DV40, as well as the TC Setup mode which provides preferences/settings for time code recording/playback. Read this chapter when carrying out the operations for internal time code generator setting, force-jamming to an external time code, chase offset to an external time code, etc.<Precautions on installation>

Do not install the unit in the following conditions.

• in a extremely hot or cold place
• in a moist place
• in a dusty place
• in a strong magnetic field or near a device which generates a magnetic field
• in the direct sunshine

Setting the internal clock

The internal clock is built in the unit, which is adjusted to the Japanese time when shipped. Set the clock to your local time before using according to the following procedure. The internal clock time is used for date information and a tentative name when creating an

Formatting a DVD-RAM disk

To make a DVD-RAM disk usable with the DV40, format the disk by the “UDF format”. Two format modes, “Normal” and “Tape”, are available with this unit. Use either format according to the situation. audio file, as well as necessary data for executing the multiple undo function.

Tips: How to enter a desired label name Press the [MARGIN RESET/CLR] key repeatedly until the tentative name currently shown is erased. By using the Jog dial (or using the appropriate numeric key), you can enter the desired character at the editing point (flashing point). You can move the editing point by pressing [SKIP/CURSOR] I<</>>I key after entering a character.

Download Now

Related Posts

Precautions on safetyAvoid excessive heat and humidity. Do not expose the PD-6 to extremes of humidity.... 

When supplying the power to the unit from the AC power outlet, only use the supplied AC adaptor. If... 

Realtime clock setting The realtime clock is built in the DV824. The realtime clock data is used for... 

Supporting two recording formats The CR500 supports both the BWF (Broadcast Wave Format) and CD-DA... 

Do not let water or other liquid, or metal objects such as pins, accidentally enter the inside of the...