Delta Manual

Realtime clock setting

The realtime clock is built in the DV824. The realtime clock data is used for date/time of creation of a file. By default, the realtime clock is set according to local date/time of the factory. Therefore, set the clock correctly according to your local date/time before using.

When loading the unused disk supplied with the unit, the disk is scanned and the display shows “Unformat!”, followed by the second level screen of the “Format” menu item in the “DISK UTILITY” menu of the MENU mode. You can now execute the “initial formatting” by following the procedure described on page 20.Unformatted disk

As described earlier, the unit recognizes that the disk is unformatted and shows “Unformat” on the display, followed by the “Format” menu item of the “DISK UTILITY” menu in the MENU mode

Recorded disk

If you set a DVD-RAM disk on which any audio file is recorded, the earliest recorded audio file (file number 001) on the disk is loaded normally. For example, if five recorded audio files (001 through 005) exist on the disk, the unit always starts up at the beginning (ABS 0) of the “001″ file. However, if the “Resume” menu item of the “DISK UTILITY” menu in the MENU mode is set to “On”, the audio file previously loaded before turning off the power last time is loaded (see page 154 for details).

Download Now

Related Posts

When supplying the power to the unit from the AC power outlet, only use the supplied AC adaptor. If... 

Before using the DV40 Before using the DV40, you must carry out some preparations. This chapter describes... 

<Accessing the “Add Machine ID” item> While the unit is stopped, press the [SHIFT]... 

Supporting two recording formats The CR500 supports both the BWF (Broadcast Wave Format) and CD-DA... 

Precautions on safetyAvoid excessive heat and humidity. Do not expose the PD-6 to extremes of humidity....