Delta Manual

Hitachi AXC12EBS

About the FM MODE (FM band only)

You can select either Auto mode (”AUTO” is appeared in the display) or Mono mode (”AUTO” disappeared in the display) as tuning mode by pressing {FM MODE} on the front panel. When, with “AUTO” in the display, a stereo broadcast is received “STEREO” appears in the display.

With the Mono mode, the auto search function is not available. To know the tuning frequency steps, see the table of Tuning Frequency Steps.

About Dubbing

Due to the auto reverse function of the tape decks, the deck duplicate both side of a tape automatically. If there is an important recorded data on another side of a tape, we recommend to take off the record-preventive tab of that side to prevent from erasing the data. We recommend to use a blank tape with the same length as a source tape for safe dubbing.
Note about the DOLBY Noise Reeducation system when dubbing:

The DOLBY NR switch is effective only to the playback sound through the monitor (speakers or headphones) while dubbing. If the source tape in TAPE 1 has been recorded with DOLBY NR On (or Off), then the tape in TAPE 2 will be duplicated with DOLBY NR ON (or OFF). when you want to listen to the playback sound while dubbing, set the switch to ON or OFF, nestling to the tape loaded in the TAPE 1.

Demagnetization

The head inevitably becomes magnetized slightly after long use. As a result, high-frequency sound may be lacking or noise is generated. Perform head demagnetization occasionally with a head eraser

Download Hitachi AXC12EBS CD-HI-FI Systems User’s Manual

Related Posts

Hitachi AXM10E Mini Compo SWITCHING THE POWER STANDBY/ONSwitching on : The STANDBY indicator goes off.... 

Hitachi DR100EBS Humming may be produced if this system is set near a TV or other audio equipment. If... 

Hitachi AX-M70MP3 Connecting the AC Power Cord Insert the AC power cord into a wall outlet, and your... 

Hitachi AXF100W NOTES Load the cassette tape onto which you want to record in the tape deck, with side... 

Hitachi AXM20EBS Mini Compo RESET If operations or the display malfunctions: Many functions of this unit...