Delta Manual

Hitachi AXM20EBS Mini Compo

RESET

If operations or the display malfunctions: Many functions of this unit are controlled by microprocessors which are vulnerable to electromagnetic interference. To restore your systems functions in such an event, make sure the unit in standby mode and then press the reset switch. You will also have to preset your radio stations again because pressing the reset switch clears the preset stations.

Note:

• When seek tuning to the required station is not possible because the broadcast signal is too weak, press the UP or DOWN button momentarily to perform manual tuning.
• When the unit is set to STANDBY, or another mode (CD or AUX) is selected, the last tuned frequency is stored in memory. When the power is switched on again and BAND button is pressed, the same station will be turned to.

Do not store discs in high-temperature, high-humidity locations. The discs may develop warps and become unable to play. Also, discs with moisture on them may be unplayable. Wipe any moisture off with a soft, dry cloth, and be sure discs are fully dry before using.

GENERAL SECTION

SWITCHING THE SYSTEM ON AND PUTTING IT INTO STANDBY MODE

• Switching ON : The STANDBY indicator goes off. The display window back light lights up.
• Switching to STANDBY : The STANDBY indicator lights up. The display window back light goes off and only the clock is indicated.

Download Hitachi AXM20EBS Mini Compo HI-FI Systems User’s Manual

Related Posts

Hitachi AXM10E Mini Compo SWITCHING THE POWER STANDBY/ONSwitching on : The STANDBY indicator goes off.... 

Hitachi AXF100W NOTES Load the cassette tape onto which you want to record in the tape deck, with side... 

Hitachi AXF100WUN PRECAUTIONS FOR INSTALLATIONAlways install this unit horizontally. For heat dispersal,... 

Hitachi HMDR50E PRECAUTIONS FOR INSTALLATIONThis unit always install horizontally. For heat dispersal,... 

Hitachi HCUR700E Protector circuitThe HTA-R150E is equipped with a high speed protector circuit. This...