Delta Manual

Install software

1. Quit all open programs.
2. Insert the CD-ROM. The installation program should start automatically. If the installation program does not start: On the Start menu, click Run and type: x:setup.exe, where x is the letter of the CD-ROM drive.
3. Follow the directions on screen. The installation program suggests which connection, USB or SCSI, you should use.

Connect the power cable

1. Connect the power cable between the scanner and a surge protector or grounded wall outlet that is easily accessible. This turns on the scanner. (There is no power switch.)
2. Turn on the computer.

If you see a dialog box informing you that new hardware has been found, follow the directions on screen

The scanner can be connected to the computer using a USB or a SCSI connection. When you run the scanning installation program, the program checks to see if the computer supports USB. If supported, USB is recommended because its installation is simpler.

Checking the USB connection

This scanner can be connected to the computer using USB if these requirements can be met:

• The computer has a USB connector on the back (see below).
• The computer is running Microsoft Windows 98, 2000, or Me.
• In the computer BIOS, USB is enabled. In some older computers, it is disabled. See the documentation that came with the computer. If you change the BIOS, restart the computer and reinstall the software.

Download HP Scanjet 7400C Series Scanner Windows Setup and Support Guide

Related Posts

HP warrants to you, the end-user customer, that HP hardware, accessories and supplies will be free from... 

color copy/b&w copy Choose one before pressing COPY to ensure the best settings are used. Only use... 

If you are using an unsupported e-mail program, such as a Web-based program like Microsoft Hotmail®,... 

USB If you have Power Macintosh or your computer is running Windows 98, you can connect the Expression... 

Connect the automatic document feeder (ADF) The automatic document feeder (ADF) is included with the...