Delta Manual

Hold processor with thumb and index fingers oriented as shown. [Ensure fingers align to cket cutouts (F).] Align notches (G) with socket (H). Lower the processor straight down without tilting or sliding the processor in the socket.

With the MOTHERBOARD INSTALLED IN THE CHASSIS, place the fan heatsink onto the motherboard, aligning the fasteners through the holes. (Be careful not to damage the thermal interface aterial attached to the bottom of the fan heatsink.)

This processor is intended to be professionally installed. Before installing the processor, lease review the additional integration notes available at http://www.intel.com/go/integration. Take proper electrostatic discharge (ESD) precautions such as using appropriate ground straps, gloves, and ESD mats.Remove processor from protective cover. (HOLD PROCESSOR ONLY AT EDGES, BEING CAREFUL NOT TO TOUCH BOTTOM OF PROCESSOR) Do not discard the protective cover. Always replace the processor cover if the processor is removed from the socket.

Remove protective cover (E) from load plate. Do not discard the protective cover. Always replace the socket cover if the processor is removed from the socket.

Download Now

Related Posts

Intended Audience The TPS is intended to provide detailed, technical information about the board and... 

Untied Overclocking Technology This motherboard supports Untied Overclocking Technology, which means... 

USB Support The desktop board has two back panels USB ports. You can connect two USB peripheral devices... 

BIOS Setup Program Modes The BIOS Setup program has three modes of operation:Normal mode for normal... 

CPU Installation This motherboard is bundled with one selected Dual Core CPU operating at FSB1333 /...