Delta Manual

Menu Selection System

This section explains how to use the menu selection system. [Menu] on the operation panel allows you to use the menu to configure the printer settings to your specific needs. Settings can be made when Ready is indicated on the printer message display

Status Pages

This section explains the procedure for printing the status pages. The status page is a list of parameters and settings for most basic printer configurations. You may be required to produce a status page when requesting service to the printer.

e-MPS

e-MPS is an abbreviation for enhanced-Multiple Printing System which implements the following functions that are available from the printer driver:

• Job Retention
• Job Storage

In either job mode, when printing a document, the print data is transferred from the computer to the printer then stored on the printer’s hard disk. Since copies of the document are printed using the stored data, printing is performed faster with less computer spooling time and less network traffic.

Paper Grain

When paper is manufactured, it is cut into sheets with the grain running parallel to the length (long grain) or parallel to the width (short grain). Short grain paper can cause feeding problems in the machine. All paper used in the machine should be long grain.

Download Kyocera Mita FS-4000DN User’s Guide

Related Posts

Thickness The paper used with the machine should be neither extremely thick nor extremely thin. If you... 

Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated... 

Basis Weight Basis weight is the weight of a standard quantity of paper. In the traditional system,... 

Laser Safety This printer is certified as a Class 1 laser product under the U.S. Department of Health... 

Brother HL-1050 Remote Printer Console Program for DOS The utility program, Remote Printer Console (RPC),...