Delta Manual

Keeping the paper in the custody

Keep the paper in the custody taking care of the following matters.

1. Do not expose the paper to the direct sunlight.
2. Keep the paper away from high humidity. (It must be less than 70%)
3. Put the paper on a flat place
4. If you keep the paper in the custody, which you have already unpacked, put it into the polyethylene bag to avoid the humidity.

Open errors

When any cover or unit of the machine is open, any of the following messages will be displayed.

• Cover is opened. Close the Cover. or Printer is starting up.
• Roll Deck is open. Close the Roll Deck.
• Close the scanner cover.

Set XX roll paper to the Roll Deck.

When “Set XX roll paper to the Roll Deck” is displayed, set the roll paper of required size to the Roll Deck. (“XX” stands for the paper width.) Refer to [2.3 Replacement of Roll Paper] on page 2-4 for the way to set the roll paper.

Set a paper to the bypass feeder.

When “Set a paper to the bypass feeder” is displayed, set a cut sheet paper to the Bypass Feeder. Refer to [2.5 Set of Cut Sheet Paper to the Bypass Feeder] on page 2-13 for the way to set the cut sheet paper.

Download Kyocera Mita KM-3650w User’s Guide

Related Posts

Selecting the Right Paper Laser printing is a process involving laser light, electrostatic discharge,... 

Smoothness The paper should have a smooth, uncollated surface. Paper with a rough or sandy surface can... 

Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated... 

Basis weight Basis weight is the weight of paper expressed in grams per square meter (g/m²). Paper... 

Thickness The paper used with the machine should be neither extremely thick nor extremely thin. If you...