Delta Manual

IMPORTANT

Stationary images in video games can “burn” into some TV screens, creating a permanent shadow. Consult your TV owner’s manual or manufacturer before playing games

To connect to TV and audio:

1. Turn off your console.
2. Connect the AV connector on the S-video cable to the AV port on your console.
3. Connect the S-video connector on the S-video cable to the S-video input on your TV. Leave the yellow composite video connector unconnected.
4. Connect the left and right (white and red) audio connectors on the S-video cable to the audio input on your TV, receiver,  or amplified speaker system.
5. Turn on your console. From the System area, you can change your display settings. Select the appropriate screen size and  resolution for your TV.

If your system (typically, a receiver or amplifier) has digital audio input, you can connect to digital audio rather than to the standard left and right audio inputs. Digital audio input should produce higher-quality sound.Sound with No Picture

Verify that the TV is turned on. Make sure the audio and video connectors are connected to the same input group on the back of your TV. If you’re using digital audio, make sure the TV has been set to display the input group into which the S-video cable is plugged.

Download Now

Related Posts

Connect to a Digital Audio System If your system (typically, a receiver or amplifier) has digital audio... 

If your system (typically, a receiver or amplifier) has digital audio input, you can connect to digital... 

Prevent the Console from Overheating Do not block any ventilation openings on the console or power supply.... 

Connect to a Digital Audio System with the HDMI Cable If your system (typically, a receiver or amplifier)... 

Connect the Controller to Your PC Running Windows XP Xbox 360 Controller software for Windows enables...