Delta Manual

Returning to a specific scene

While the counter display appears in the display area,the VTR will return the tape to a specific scene when ZERO STOP is pressed in the stop mode.

1. The tape is fast forwarded or rewound until the counter display show “0:00:00″.
2. This operation is not performed while a display other than the counter display appears in the display area.

Automatic Playback

When a cassette with the opened record prevention tab is inserted,the VTR starts playback automatically.

OSD Mode

Use the SUPER switch to per from the OSD settings. Set the OSD display on the monitor screen which is connected to OUTPUT 1 or 2. The OSD display simultaneously appear or do not appear at OUTPUT 1 and 2 AUTO: The On Screen Display will appear on the monitor screen for a few seconds when you operate the VTR.

ON  : The On Screen Display will always appear on the monitor screen when you per from the VTR.
OFF : The On Screen Display will not appear.

Download Panasonic AGDV1000 DVC Recorder Operating Manual

Related Posts

FRONTPOWER. Press to switch the VCR from on standby mode or vice verse in standby mode,the unit is   ... 

Hitachi AXC12EBS About the FM MODE (FM band only) You can select either Auto mode (”AUTO”... 

Control end ComponentsReverse Search Button/Rewind/Review Button/Recording Check Button (-> 18,24,25,30) Forward... 

Setting the Menu The camera comes with menus that allow you to set the settings for taking pictures... 

Supporting two recording formats The CR500 supports both the BWF (Broadcast Wave Format) and CD-DA...