Panasonic Lumix DMC-F7 Instruction Manual
Charging environment and charging error
- Charge the battery in a place with the temperature of 10 to 35 C. (The battery is also the same temperature)
- When charging starts, the status indicator blinks at about 2 second intervals. If, after charging starts, the status indicator blink quicker, it’s a charging error. In this case, remove the AC adaptor from the electrical outlet, remove the battery and check if both room and battery temperature is too low or high and then charge it again. (It is not possible to cancel the error by only turning the camera off/on) if the problem persists, consult the dealer.
SD Memory card
- RP-SDH512 (512MB)
- RP-SDH256 (256MB)
- RP-SDH128 (128MB)
- RP-SD064B (64MB)
- RP-SD032B (32MB)
- RP-SD016B (16MB)
- RP-SD008B (8MB)
Multi Media Card
- VW-MMC16 (16MB)
- VW-MMC8 (8MB)
When using the Multi Media Card, after recording motion images, the screen may appear grey, but this is not a malfunction.
As the card contents could be damaged or erased because of the electrical noise, static electricity and camera and card defects, store the important data also in PC (p66) using the USB socket.
Related Posts
- Panasonic Lumix DMC-F1S Instruction Manual
Charging environment and charging error Charge the battery in a place with a temperature of 50 F –...
- Panasonic Lumix DMC-F1K Instruction Manual
Charging environment and charging error Charge the battery in a place with a temperature of 50 F –...
- Panasonic Lumix DMC-FS3A Instruction Manual
Care of the camera Do not strongly shake or bump the camera by dropping it etc. This unit may malfunction,...
- Panasonic Lumix DMC-FS5R Instruction Manual
Do not turn this unit off, remove its battery or card or disconnect the AC adaptor (DMW-AC5PP; optional)...
- Panasonic Lumix DMC-FS20S Instruction Manual
SD Memory Card, SDHC Memory Card and Multi Media Card are indicated as card in the text. The card is...
No Responses to “Panasonic Lumix DMC-F7 Instruction Manual”