Plustek OpticFilm 7200i SE User’s Guide
Plustek OpticFilm 7200i SE
How to Use This Guide
This User’s Guide provides instructions and illustrations on how to install and operate your scanner. This guide assumes the user is familiar with Microsoft Windows XP, 98, Me and 2000 Professional. If this is not the case, we suggest you learn more about Microsoft Windows by referring to your Microsoft Windows manual before using your scanner.
Software Installation Requirements
Your scanner comes with the image-editing software (Presto! ImageFolio), document management software (Presto! PageManager), the scanner’s driver, QuickScan Setting and LaserSoft SilverFast software.
All of these software applications use approximately 160 megabytes of hard disk space after they are installed into your computer. To ensure ample room for the installation, as well as for scanning and saving images, a minimum of 260 megabytes of hard disk space is recommended. The USB scanner can only operate under the Microsoft Windows 98, Me, 2000 Professional or XP operating system.
If the USB components on your computer are functioning correctly, they will automatically detect the scanner causing the “Add New Hardware Wizard” or “Found New Hardware Wizard” to be launched.
Note: If your computer was off when you connected the scanner, the “Add New Hardware Wizard” message will be displayed when you turn the computer on and when Windows starts.
Scanner Setup After Windows XP Upgrade
If you plan to upgrade your operating system from Windows 98 or Me to Windows XP after having installed the scanner software, please follow the instructions below:
- Unplug the scanner’s AC power adapter from the electrical outlet.
- Unplug the scanner’s USB cable from the rear of the computer.
- From the Windows START menu, click on [Programs] and then [Plustek USB Scanner]. In the pop-up
menu that opens, click on [Uninstall USB Scanner]. Follow the on-screen instructions to remove all the scanner software.
Download Plustek OpticFilm 7200i SE User’s Guide
Related Posts
- Plustek OpticFilm 7200i User’s Guide
Plustek OpticFilm 7200i Hardware Requirements This scanner connects to your computer through the Universal...
- Plustek OpticPro 12000P Turbo User’s Guide
Plustek OpticPro 12000P Turbo How to Use This Guide This User’s Guide provides instructions and illustrations...
- Plustek OpticPro 12000P User’s Guide
Plustek OpticPro 12000P Hardware Requirements Your scanner uses an interface called an Enhanced Parallel...
- Plustek OptiCard 820 User’s Guide
Plustek OptiCard 820 Software Installation Requirements Your scanner comes with the image-editing software,...
- Plustek OpticBook 3600 Corporate User’s Guide
Plustek OpticBook 3600 Installing Additional Software Your scanner is TWAIN compliant and functions with...
No Responses to “Plustek OpticFilm 7200i SE User’s Guide”