Delta Manual

Overview

The L7032 is a 32 page per minute (ppm) continuous-form laser printer. It features 600 dots per inch (dpi) address ability, high toner capacity, user-replaceable and long-life components, a reversible drive system, and a leading-edge sensor to reduce forms waste. The printer supports three emulations: PCL, PGL, and VGL.

Location of Printer Components

The illustrations in this section show the mechanical and electronic components of your printer. Please review the illustrations so you will be familiar with the printer’s components when you operate the printer, clean and maintain it, and replace consumables.The paper fold switch tells an optional power paper stacker how to stack the output paper. This switch is used only with power paper stacker (see list of models in Appendix A, Specifications). If you do not have the power paper stacker, you do not need to use this switch. See Section 3.4 Loading Paper for information about how to use this switch with an optional power paper stacker.

Download Now

Related Posts

Power Requirements The printer must be connected to a power outlet that supplies 88 to 135 Volts AC... 

Output Darkness By default the system is configured to meet most user requirements. However, some applications... 

Before You Begin Read this chapter carefully before installing and operating the printer. The printer... 

Consumable Monitoring With PrintNet Enterprise The Integrated Print Management System works with PrintNet... 

Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21...