Delta Manual

Output Darkness

By default the system is configured to meet most user requirements. However, some applications require that the output remains darker than the nominal set point while some applications are less critical and could tolerate a lighter final image.

The system can easily adjust to this variability. A setting
under the Printer Control menu is available that allows the user to adjust the final output.
Ribbon Flipping

In some cases, the application’s print pattern is narrow enough where only half of the ribbon is used when printing. In these cases, you can flip the ribbon and use the other half. The Integrated Print Management System detects the flip and resets the ribbon life to 100%.

Consumable Monitoring With Print Net Enterprise

The Integrated Print Management System works with Print Net Enterprise (PNE). PNE allows a system administrator to remotely view the current consumable status of all printers. PNE can be configured to deliver alerts on all consumable warnings. When a ribbon reaches the low state, PNE notifies the system administrator remotely via an automated e-mail alert of the low condition.

This allows corrective action to be taken before the ribbon reaches its end of life. If the ribbon is not changed, an alert will again be initiated once the ribbon reaches the 0% end point. Refer to your Print Net Enterprise Remote Management Software manual for details.

Taking Care Of Your Printer

Your printer will produce high print quality jobs if it is well taken care of. Periodic cleaning, handling the printer properly, and using the correct printer supplies such as ribbon and paper ensures optimum performance. Chapter 7 explains how to clean the printer, and printer supplies are listed in
Appendix A

Download Now

Related Posts

Consumable Monitoring With PrintNet Enterprise The Integrated Print Management System works with PrintNet... 

Before You Begin Read this chapter carefully before installing and operating the printer. The printer... 

Power Requirements The printer must be connected to a power outlet that supplies 88 to 135 Volts AC... 

Overview The L7032 is a 32 page per minute (ppm) continuous-form laser printer. It features 600 dots... 

Cable Specifications (Not provided) The parallel cable should be compatible with the Centronics R parallel...