Delta Manual

Power Requirements

The printer must be connected to a power outlet that supplies 88 to 135 Volts AC or 178 to 271 Volts AC at 50 to 60 Hz. The printer automatically senses and adjusts itself to conform to the correct voltage range. Primary circuit protection is provided by the power switch, which is also a circuit breaker.

Consult an electrician if printer operation affects local electrical lines. See “Electrical Characteristics” on page 168 for additional power specifications.

Powering On The Printer

When you power on the printer, it executes a self-test. The default power-up state is online. When the self-test completes and the software has initialized successfully, the status indicator light turns on, indicating the printer is online.The default value of the type of emulation you have installed appears in the upper right corner of the display. The ribbon life remaining is shown on the second line.

If there is a fault during the self-test, the status indicator flashes and a specific fault message appears on the display (such as “LOAD PAPER”). The alarm also sounds if it is configured to do so. See “  LCD Message Troubleshooting Table” on page 130 for information on fault messages and solutions

PAPER ADVANCE

Performs advance to top-of-form, as defined by the current active form length. The key works both online and offline.

• If online with data in the printer buffer, the data will print and then the paper will move to the next top-of-form.
• In the fault state, PAPER ADVANCE will advance the paper. The first press moves to the top of the next  available form. All subsequent presses advances one forms length as defined by the current active forms length.

Download Now

Related Posts

Before You Begin Read this chapter carefully before installing and operating the printer. The printer... 

Overview The L7032 is a 32 page per minute (ppm) continuous-form laser printer. It features 600 dots... 

Consumable Monitoring With PrintNet Enterprise The Integrated Print Management System works with PrintNet... 

Output Darkness By default the system is configured to meet most user requirements. However, some applications... 

Brother HL-1050 Remote Printer Console Program for DOS The utility program, Remote Printer Console (RPC),...