Delta Manual

Before You Begin

Read this chapter carefully before installing and operating the printer. The printer is easy to install. However, for your safety and to protect valuable equipment, perform all the procedures in this chapter in the order presented.

Powering On The Printer

When you power on the printer, it executes a self-test. The default power-up state is online. When the self-test completes and the software has initialized successfully, the status indicator light turns on, indicating the printer is online.

The default value of the type of emulation you have installed appears in the upper right corner of the display. The ribbon life remaining is shown on the second line.Operating Modes

Online. In online mode, the printer can receive and print data sent from the host. Pressing the ON LINE key toggles the printer from online to offline mode. The status indicator is lit in online mode.

Offline. In offline mode, you can perform operator functions, such as loading paper and setting top-of-form. You can also move within the printer configuration menus. Pressing the ON LINE key toggles the printer from

offline to online mode. The status indicator is off in offline mode. Fault. In fault mode, a condition exists which must be cleared before printing can continue. The status indicator flashes, the alarm beeps (if configured to sound), and a descriptive fault message displays.

The current operating mode can be selected via control panel keys or can result from routine operations such as powering on the printer.

Download Now

Related Posts

Power Requirements The printer must be connected to a power outlet that supplies 88 to 135 Volts AC... 

Output Darkness By default the system is configured to meet most user requirements. However, some applications... 

Consumable Monitoring With PrintNet Enterprise The Integrated Print Management System works with PrintNet... 

Overview The L7032 is a 32 page per minute (ppm) continuous-form laser printer. It features 600 dots... 

Cable Specifications (Not provided) The parallel cable should be compatible with the Centronics R parallel...