Delta Manual

Sanyo VPCT700

Inserting and Removing the Battery

We highly recommend using specified rechargeable lithium-ion battery (3.7V) to fully demonstrate this camera’s. Charge the battery before using the camera. Make sure that the power of the camera is off before inserting or removing the battery.

Inserting the Battery

1. Open the battery/SD/SDHC memory card cover.
2. Insert the battery in  the correct orientation shown.
   • Tilt the battery lock lever in the direction of the arrow and orient the battery so that its label is facing to the rear side of the camera, and then insert the battery.
3. Close the battery/SD/SDHC memory card cover.

Setting Image Resolution and Quality

Resolution and quality settings determine the pixel size (dimension), image file size, and compression ratio for your images. These settings affect the number of that can be stored. As you get to know the camera, it is recommended that you tray each quality and resolution setting to get an appreciation for the effects that these settings will have on your images.

Higher resolution and higher quality images offer the best photographic results but produce large life size. Therefore, few images will take up a lot of memory space.

Using the Digital Zoom

Using a combination of 3 times optical zoom and 4 times digital zoom permits zoom photography of up to 12 times to suit the subject and the distance. The digital zoom is a compelling feature, the more an image is enlarged (zoomed), the more pix elated (grainier) the image will appear.

Download Sanyo VPCT700 Digital Camera Owner’s Manual

Related Posts

Sanyo VPC503 USB connection Still images or movie clips that you have recorded can be downloaded to your... 

Sanyo VPCS500 Formatting an SD/SDHC Memory Card or Internal Memory The term “Formatting”... 

Sanyo VPC603 PictBridge support You can connect the camera directly to a printer that supports PictBridge... 

Sanyo VPCS600 Installing the Batteries You can 2AA size batteries (Ni-MH rechargeable or alkaline) to... 

Sanyo VPC J1 Power Save Setting Your camera has a “power save” function whereby the power...