Delta Manual

Brush Roller Obstruction – Auto Shut-Off. If the brush roller is obstructed, the machine will shut off and the red “CHECK BRUSH” light located on top of the power head will flash.

The user should turn the switch off, unplug the machine and immediately remove the obstruction. If the user restarts the machine without removing the obstruction, the machine will again shut off and the “CHECK BRUSH” light will flash.

Place the power head (9) on the floor with the swivel neck (20) and the support lever (21) upright. Hold the dust bag housing (6) vertically and place it over the swivel neck and support lever. Push firmly and evenly down so that the housing release button (8) snaps outward to its “locked” position.

Starting The Machine

Before turning on your vacuum cleaner, make sure that the vacuum handle is in its upright locked position and that you have a firm hold on the handle grip to keep the machine from moving forward.

1. Turn the quick release cable hook (15) to the up position by moving it to the left or right and release the cable.
2. Release the cable form the upper cable hook (26).
3. Plug in and press the switch (2) to the ’’I’’ position.

Changing the Dust Bag

To change the dust bag, pull the cover release flap forward (#5 on page 5) and lift the cover (7) from the dust bag housing. The cover release flap must remain in a forward “pulled-out” position to change dust bags and lock them into place.

Squeeze the clamps on both sides of the dust bag sealing plate, slide the plate (28) from the holder (29) and push the cap on to seal the bag. Slide the sealing plate (28) of a new bag into the holder and push it in firmly. Re-insert cover into dust bag housing, push it forward, then lock it in place by pushing down the cover release flap. You may find it convenient to store the bag cap inside the dust bag housing below the dust bag.

Download Sebo X1.1 Upright Vacuum Cleaner User’s Manual

Related Posts

Stationary Use Warning. When the machine has its handle in the upright-locked position, it is designed... 

Automatic Power Head Height Adjustment. Based upon the resistance of the brush roller against the floor,... 

Automatic Power Head Height Adjustment. Based upon the resistance of the brush roller against the floor,... 

Indicator light On top of the power brush is a red/green indicator light. lf the green light is on and... 

Sanyo SC-180 Hook the power cord over the clip which is located on the upper cord storage hook as shown....