Delta Manual

DISCLAIMER

Motor sports are dangerous. No warranty or representation is made as to product’s ability to protect the user from any injury or death; the user assumes that risk. Sparco Motor Sports’ products are legal in all 50 states for use on racing vehicles which may never be used on a highway. Not applicable or intended for street or highway use

INSTALLATION

1. Assemble the harness bar support rods as shown below using the provided hem joints and nuts. Leave at least ¼” of thread showing on each hem joint to allow for adjustment during installation. Do not fully tighten the nuts at this time. NOTE: The smaller hem joint has reverse thread.
2. On both sides of the vehicle’s interior, remove the plastic upper seat belt bolt cover and remove the upper bolt as shown here. The factory retaining washer needs to be removed so the factory bolt can be completely removed from the upper mount.
   • NOTE: The factory retaining washer will be reused in the installation process. SPARCO HARNESS BAR 2003-2004 MITSUBISHI LANCER EVOLUTION PART # 30018
3. Assemble the upper mounting hardware as shown in this picture and bolt the assembly into vehicle. Do not fully tighten the bolt at this time.
4. Remove the factory lower harness bolt cover (rubber) and remove the bolt from the vehicle. Remove the factory retaining washer and remove the bolt from the harness mount. Assemble the lower hardware as shown in this picture. Bolt assembly into the vehicle. Do not fully tighten bolt at this time

Download Now

Related Posts

DISCLAIMER Motor sports are dangerous. No warranty or representation is made as to product’s ability... 

INSTALLATION NOTE: You will need a #50 Torx bit for this installation Assemble the harness support rods... 

INSTALLATION Assemble the harness support rods as shown below using the provided hem joints and nuts.... 

INSTALLATION Assemble the harness support rods as shown below using the provided hem joints and nuts.... 

With the Base Frame Assembly (from Step 1) on the floor, center the Lower Lat Tower Assembly over the...