Sunfire True Subwoofer Architectural Owner’s Manual
Sunfire True Subwoofer Architectural
The power amplifier within the Solitaire 12 Subwoofer is capable of delivering over 1,500 watts into a 3.3 ohm resistor (the driver voice coil resistance). The Solitaire 10 is capable of delivering 1,250 watts. When the same full output is applied to the driver, however, the enormous back-electromotive force gen er at ed as a consequence of its large motion and giant magnet, causes the current ß ow to be much less than if it were a 3.3 ohm resistor.
Trigger Inputs
These two inputs can be used to automatically turn on the subwoofer. To do this, connect 12 VDC to either of these terminals. Some Home Theater preamplifier s, such as the Sun fire Theater Grand series, have matching 12 VDC Trigger outputs. When they are turned on, the subwoofer will turn on
Crossover Frequency
This controls the high frequency cutoff point. With the control set to the 100 Hz mark, the sub woof er will reproduce frequencies up to 100 Hz. If the control is set fully clockwise, the crossover is bypassed and the subwoofer will reproduce a wide frequency range. With the control fully counter-clock wise the sub woof er re produces a narrow range, up to 30 Hz.
We rec om mend using this high-pass function with main/satellite speakers that are small and not designed to reproduce low frequencies. If your main speakers are capable of operating full range, then you will not need to use the high-pass function.
Download Sunfire True Subwoofer Architectural Owner’s Manual
Related Posts
- Sunfire True Subwoofer Super Junior Owner’s Manual
Sunfire True Subwoofer Super Junior Your Sunfire True Subwoofer EQ Solitaire is designed to give you...
- Sunfire True Subwoofer Signature Owner’s Manual
Sunfire True Subwoofer Signature Make sure that you keep your sales receipt. It is the only way to establish...
- Sunfire Solitaire 12 Subwoofer Owner’s Manual
Sunfire Solitaire 12 The Amplifier The large movement range of the driver creates greater air pressure...
- Sunfire Symphonic Reference PreAmp Owner’s Manual
Sunfire Symphonic Reference PreAmp AC Power Considerations Ensure that the unit is plugged into an outlet...
- Genelec SE7261A Owner’s Manual
Genelec SE7261A System Genelec SE7261A DSP Subwoofer is designed for precise monitoring of 24 bit/192...
No Responses to “Sunfire True Subwoofer Architectural Owner’s Manual”