Delta Manual

OUTPUT-This balanced XLR jack provides a low-impedance mic-level signal for connecting to a microphone input on a mixer. If the mixer has phantom power, it can be used to power the DB-1A. Power automatically switches away from the internal natters to save battery life
Pin 1    = Ground
Pin 2    = Hot(+) and in-phase with the input signal
Pin 3    = Cold(-)

Disclaimer

Since we are always staving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice.

POWER LED-Indicates when the power is on. When powered from the internal batteries, it lights when a signal is plugged into the INPUT jack. When powered from a mixer’s phantom power, it lights as long as the phantom power is applied.

PKUP/LINE-Move this switch to the left when connecting an instrument with a passive pickup, like an electric guitar. Move this switch to the right when connecting a line-level signal to the input.

FLAT/FILTER-Pus this switch in to engage a high-cut filter to reduce hiss and noise when using the AMP input setting. The filter has no effect when the input is set to INST (2).

Download TAPCO DIBOX DB-1P Owner’s Manual

Related Posts

Disclaimer Since we are always staving to make our products better by incorporating new and improved... 

The BBE DI-10 is an active direct box used for converting line out and speaker out signals to balanced... 

Alesis MultiMix 8 Line MAIN EXPAND IN and OUT jacks You can chain together as many MultiMix8Line mixers... 

The Link.USB Interface The Link.USB interface provides two analog audio inputs that can accept microphone... 

Crest X-Rack XRM When the switch is depressed, a Pad is inserted into the signal path and the input preamp circuit...