TAPCO Link. FireWire Audio Interface Owner’s Manual
Posted : Aug - 20 - 2009 @ : 7:03 pm | Filled under: Computer Hardware, Sound card & midi
Getting Started
Use this section to get your Link.Fire Wire set up quickly. Also refer to the Link.Fire Wire Quick-Start Guide included with your Link.Fire Wire audio interface, which includes a tutorial on how to make a recording using the Link.Fire Wire and Traction.
Installing the Software
- The Link.Fire Wire CD contains an installer that will install the drivers on your PC. If you are using a Macintosh (running OS X version 10.3.9 or later), you don’t need to install drivers because the Fire Wire drivers are included in OS X. Note: If you are using OS X 10.3, be sure to update to the latest released version, 10.3.9.
- Your Link.Fire Wire CD also contains Traction 2.1. Double click the file “Traction Setup.exe” and follow the instructions to install Traction on your PC. For the Macintosh, double-click the file “Traction Setup.dmg” and drag the Traction icon into your Applications folder.
Connect guitars or other instruments using the XLR/TRS connectors on the back of the Link.Fire Wire. Press the front panel LINE/INSTR button (guitar icon) if you are connecting your guitar or instrument directly to the Link.Fire Wire without using a preamplifier or direct box.
Mirror Mode: This is the default mode of operation in which two audio streams are returned to the Link.Fire Wire from the DAW software application and are mirrored on the Phones out, Monitor out, and S/PDIF out. This is the most common application, where you can monitor the master stereo mix from the DAW in the headphones and studio monitors, and have the mix going to a recorder connected to the S/PDIF output.
Download TAPCO Link. FireWire Audio Interface Owner’s Manual
Related Posts
TAPCO Link.USB Audio Interface Owner’s ManualThe Link.USB Interface The Link.USB interface provides two analog audio inputs that can accept microphone...
TAPCO Link.MIDI Audio Interface Owner’s ManualConnecting the Link.MIDI 4×4To stand the Link.MIDI 4×4 upright, pull the stabilizer bar...
TASCAM FireOne FireWire Interface Owner’s ManualTASCAM FireOne Buffer Size FireOne buffers the amount of audio that it uses to communicate with audio...
TASCAM UL-1641 USB Interface Owner’s ManualTASCAM UL-1641 USB Installing the drivers Before you can use the US-1641, you must install the appropriate...
TASCAM FW-1884 FireWire Interface Owner’s ManualTASCAM FW-1884 FireWire Software application notes Since much of the FW-1884’s operation pertains directly...
Tags: TAPCO, tapco link usb on mac set up, tapco link usb driver mac, how can I connect my tascam fireone to a tapco mixer, tapco firewire direct monitoring
No Responses to “TAPCO Link. FireWire Audio Interface Owner’s Manual”