TAPCO Link.USB Audio Interface Owner’s Manual
Posted : Aug - 20 - 2009 @ : 7:04 pm | Filled under: Computer Hardware, Sound card & midi
The Link.USB Interface
The Link.USB interface provides two analog audio inputs that can accept microphone level, line level, or direct instrument input signals. The analog audio signals are routed to high-quality ADCs (Analog-to-Digital Converters) operating at 44.1, 48, 88.2, or 96 kHz with 24-bits. The digital signal is then routed to the USB port for connection to your computer.
Connecting the Link.USB
- To stand the Link.USB upright, pull the stabilizer bar downward and twist it out 90º from the body, as shown here.
- Turn down all the Link.USB knobs to prevent any loud surprises.
- Connect microphones using the XLR/TRS combo input connectors on the back of the Link.USB. Press the 48V button if your microphone needs phantom power (mostly used for condenser mics).
Authorizing Traction 2
There is an authorization code on the sleeve of the CD-ROM that came with your Link.USB. You can authorize the software from within Traction or by going to http://my.tapcogear.com.
Latency describes the amount of time it takes for audio to get in and out of your software application. The lower the latency setting, the faster audio can get into and out of the software application.
However, a low latency setting requires more resources from your computer, so you need to find a happy balance between finding the lowest latency setting you can attain before the computer begins to have trouble routing and recording audio (e.g., dropouts, pops, distorted audio). See “What is Latency” on page 33 for more info.
Download TAPCO Link.USB Audio Interface Owner’s Manual
Related Posts
TAPCO Link. FireWire Audio Interface Owner’s ManualGetting Started Use this section to get your Link.Fire Wire set up quickly. Also refer to the Link.Fire...
TAPCO Link.MIDI Audio Interface Owner’s ManualConnecting the Link.MIDI 4×4To stand the Link.MIDI 4×4 upright, pull the stabilizer bar...
TASCAM FW-1082 FireWire Interface Owner’s ManualTASCAM FW-1082 FireWire Overview Thank you for choosing the TASCAM FW-1082. We have designed the FW-1082...
TASCAM UL-1641 USB Interface Owner’s ManualTASCAM UL-1641 USB Installing the drivers Before you can use the US-1641, you must install the appropriate...
TASCAM FW-1884 FireWire Interface Owner’s ManualTASCAM FW-1884 FireWire Software application notes Since much of the FW-1884’s operation pertains directly...
Tags: TAPCO, tapco usb manual, tapco link usb interface, tapco audio interface, http://tapcogear com drivers, my tapcogear com, tapco 4x manual book, tapco software download
No Responses to “TAPCO Link.USB Audio Interface Owner’s Manual”