Delta Manual

TASCAM FireOne

Buffer Size

FireOne buffers the amount of audio that it uses to communicate with audio applications. The amount of buffering directly determines the latency of audio passing from FireOne’s inputs, through your DAW application, and back to its outputs. The FIreOne Control Panel’s Buffer Size slider allows you to select a buffer size that is compatible with your needs and with the performance of your host computer. In general, remember that more buffering affords greater.

Control Surface Mode

The control surface features of FireOne use a virtual MIDI port to communicate with the host computer. The specific MIDI messages that are used to communicate button presses and jog/shuttle movements depend on the Control Surface Mode setting in the FireOne control panel.

Input Mon Mono

The direct input monitor is normally stereo, with Input A being heard in the left channel and Input B being heard in the right. Enabling “Input Mon Mono” causes the direct input monitor to be mono, with Input A and B being heard in both the left and right channels equally.Audio Connections

Connect output signal of your mic, guitar, keyboard, or other audio device to the FireOne, where it will be converted into digital audio and sent via FireOne to your computer. Connect the output of the FireOne to your speakers (via an amp) or headphones, so you will be able to monitor the audio signals coming into the FireOne or being produced by your computer.

Sampling Rate Lock

Normally, any audio application can change FireOne’s sample rate. When “Sample Rate Lock” is enable, only the FireOne control panel is permitted to change the sample rate.

Download TASCAM FireOne FireWire Interface Owner’s Manual

Related Posts

TASCAM FW-1082 FireWire Overview Thank you for choosing the TASCAM FW-1082. We have designed the FW-1082... 

TASCAM FW-1884 FireWire Software application notes Since much of the FW-1884’s operation pertains directly... 

TASCAM UL-1641 USB Installing the drivers Before you can use the US-1641, you must install the appropriate... 

Getting Started Use this section to get your Link.Fire Wire set up quickly. Also refer to the Link.Fire... 

TASCAM US-122L USB Installation Because the US-122 is a USB device, connection is straightforward. Simply...