TASCAM UL-1641 USB Interface Owner’s Manual
TASCAM UL-1641 USB
Installing the drivers
Before you can use the US-1641, you must install the appropriate drivers on your computer. As described below, this is a simple that uses the CD-ROM included with the US-1641.
Updating the firmware for the US-1641
TASCAM may release updates for the software that runs on the microchip inside the US-1641. This is commonly called “firmware”. When your US-1641 is plugged into the computer, the-1641 Control Panel shows what firmware version the unit is currently running.
Do not run other applications. You will probably use your computer for applications other than audio, but TASCAM recommends that you avoid running other applications at the same time you are running audio programs. Processing digital audio places a considerable load on your computer. This means that if you are running other applications (especially graphics or Internet tolls) at the same time as your audio application, processing may not be fast enough.
Audio Performance (Windows PC case)
The US-1641 driver temporarily stores input and output audio samples in buffers. The Audio Performance setting enables you to adjust the buffer size to five levels. The Lowest Latency setting is the minimum buffer size, and the Highest Latency setting is the maximum buffer size.
Audio Connections
Connect the output signal of your mic, guitar, keyboard, or other audio device to the US-1641, which will convert the signal audio and send it via USB to your computer. Connect the output of the US-1641 to your speakers (via an amp) or headphones, so you will be able to monitor the audio signals coming into the US-1641 or signals being output from your computer.
Download TASCAM UL-1641 USB Interface Owner’s Manual
Related Posts
- TASCAM FireOne FireWire Interface Owner’s Manual
TASCAM FireOne Buffer Size FireOne buffers the amount of audio that it uses to communicate with audio...
- TASCAM US-122L USB Interface Owner’s Manual
TASCAM US-122L USB Installation Because the US-122 is a USB device, connection is straightforward. Simply...
- TASCAM FW-1884 FireWire Interface Owner’s Manual
TASCAM FW-1884 FireWire Software application notes Since much of the FW-1884’s operation pertains directly...
- TASCAM FW-1082 FireWire Interface Owner’s Manual
TASCAM FW-1082 FireWire Overview Thank you for choosing the TASCAM FW-1082. We have designed the FW-1082...
- E-MU xMIDI 2×2 Manual
E-MU xMIDI 2x2 Setting up the Xmidi 2×2 Connect the Xmidi 2×2 to your computer using the supplied...
No Responses to “TASCAM UL-1641 USB Interface Owner’s Manual”