Delta Manual

Installing hardware and drivers.

The subsequent sections provide step-by-step instructions on installing and connecting the card and installing its drivers. The antenna cables needed for TV/radio reception* (*Cinergy 250 PCI / Cinergy 600 TV Radio only) are not included.

Important settings for sound card owners

If you have connected the Audio output of the TV card to the Line-In input of your sound card using the provided cinch-cinch cable, you will have to make certain settings in the mixer for the sound card so that you can hear and record the TV/Video tone. To do so, proceed as follows:

1. Double-click the volume control icon illustrated as a speaker on the task bar.
2. Be sure that the “Mute” option under the “Line-In” slider is not checked and that the “Line-In” slider is not at the bottom of its range.

Connecting an external device equipped with Scart-out

If you want to connect a device that is equipped with a Scart-out jack, you will need a special adapter for establishing the connection to the TV card.
The required adapter has a Scart jack on one side, which you plug into the external device, and three cinch jacks on the other. The three cinch jacks provide the video, audio-left and audio-right signals. Furthermore, to connect the audio-left and audio-right cable to the Line-in jack of your sound card, you will have to have a Y cable.

Connect the cable to the TV card as described below:

1. Using a cinch/cinch cable, connect the cinch jack that carries the video signal (usually yellow) to the composite-in jack on the TV card.
2. Connect the audio-left (usually white or black) and audio-right (usually red) jacks with the corresponding cinch jacks on the Y cable.
3. Plug the stereo jack of the Y cable into the Line-in input of your sound card.
4. In the TV software, select the “Composite” option as incoming signal.

Download TerraTec Cinergy 250 PCI Manual

Related Posts

Installing hardware and drivers The PCMCIA card is extremely simple to install. The installation can... 

Using the Cinergy 400 USB for the first time The Cinergy is extremely simple to install. The installation... 

Audio In If you are connecting external devices using the composite or S-video video input terminal,... 

Fully video-enabled The Cinergy 200 USB uses TV signals from your antenna or broadband cable. It can... 

Scope of delivery First, please ensure that the contents of the package are complete. The Cinergy package...