Delta Manual

To connect the IR blaster cable:

1. Locate the infrared sensor on the front of your device. This sensor is marked on some devices.*
2. Align one of the IR blaster cable’s wands about 1 inch away from the infrared sensor on the front of the device and attach it using double-sided mounting tape. If you have a second device, attach the second wand in a similar manner. (See illustration.)
   • Note: If you do not have a second device, coil the second wand with a rubber band and leave it behind the TV.
3. Plug the IR blaster cable’s plug into the TV’s IR OUT terminal.

Before controlling the device(s):

• After completing the above connections, set the CE-Link Setup menu as you desire (- page 75).
• The connected devices must also be set. For details, see the operation manual for each device.
• The CE-Link feature uses CEC technology as regulated by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s CE-Link. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.

File sharing

You can access JPEG and MP3 files that are stored on your networked home PC and view/play them on the TV.

• Connect your TV to your home network according to either Example #1 at right or Example #2 on the next page.
• Does NOT require Internet/e-mail service.

When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination

Download Toshiba REGZA 42LX177 LCD HDTV Owner’s Manual

Related Posts

About the connection illustrations You can connect different types and brands of devices to your TV... 

Color Stream® HD-1 and Color Stream® HD-2 — Two sets of  Color Stream® high-definition component... 

Before controlling the device(s):After completing the above connections, set the CE-Link Setup menu... 

To control the device(s): Point either the device’s remote control or the TV remote control (that... 

You can use the TV’s IR OUT terminal (infrared pass through) to remotely operate (through the TV)...