Delta Manual

Color Stream® HD-1 and Color Stream® HD-2 — Two sets of  Color Stream® high-definition component video inputs (with standard stereo audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with Color Stream®.

HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection

component video cables

• You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to either set of Color Stream terminals on the TV (HD-1 or HD-2). The Color Stream HD-1 and HD-2 terminals can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance (1080p is not supported).
• If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to VIDEO 2 on the side panel. If your DVD player has HDMI video, see page 19.

You can use the TV’s IR OUT terminal (infrared pass through) to remotely operate (through the TV) many infrared remote-controlled devices (such as Toshiba infrared remote controlled VCRs or DVD players) enclosed within an entertainment center or similar cabinet. Without the IR OUT connection, the device typically would need to be visible to operate it remotely.

To control the device(s):

Point either the device’s remote control or the TV remote control (that you previously programmed to operate the device; – Chapter 3) toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR blaster cable.

Related Posts

You can use the TV’s IR OUT terminal (infrared pass through) to remotely operate (through the TV)... 

About the connection illustrations You can connect different types and brands of devices to your TV... 

About the connection illustrations You can connect different types and brands of devices to your TV... 

To connect the IR blaster cable:Locate the infrared sensor on the front of your device. This sensor... 

About the connection illustrations You can connect different types and brands of devices to your TV...