Delta Manual

Unlock your Scanner

Before using your scanner ensure that the carriage lock of scanner is in the unlocked position. Insert a coin in the thumbscrew of the optical assembly lock and turn it firmly counterclockwise to unlock the optical assembly to avoid damaging the optics during transportation

Connect the SCSI Cable

Connect the SCSI cable to the SCSI interface card and the other end of the SCSI cable to the scanner. If your scanner is not chained to other SCSI devices or at the end of the SCSI chain, please connect the terminator to the remaining SCSI port of your scanner.

Static Electricity Precautions

Static electricity (in your body) can cause damage to the electronic components on the scanner’s printed circuit board or the computer’s interface card. Therefore, you need to discharge static build-up from your body before handling any card or component outside of its anti-static packaging.

Installing the Software

Install the software in the following order:

1. Image Application Software, e.g. binuscan PhotoPerfect, Adobe Photoshop.
2. Then, MagicScan.

MagicScan is the interface used by application software to control UMAX scanners. Its advanced controls allow precise adjustments in images even during the initial scan.

Download UMAX PowerLook III Scanner User’s Manual

Related Posts

Static Electricity Precautions Static electricity (in your body) can cause damage to the electronic... 

Test the Scanner The scanner automatically performs a simple self-test each time it is turned on. This... 

USB If you have Power Macintosh or your computer is running Windows 98, you can connect the Expression... 

Install softwareQuit all open programs. Insert the CD-ROM. The installation program should start automatically.... 

Epson Expression 1640XL SCSI interface Hardware: Initialized when the scanner is turned on or the scanner...