Delta Manual

Uniden PRO520XL

WARNING

This radio has been type accepted and certified by the FCC for CB Radio Service operation. Any adjustments or alterations which might alter the performance of the transceiver or the method of determining frequency are strictly prohibited.

Connect the microphone

Align the microphone connector with the jack on the front of the radio. Push the connector in firmly and secure it with the locking screw.

Connect the power

You can connect the radio to any standard 12 volt DC power source, with either a positive or negative ground. If you don’t know whether your power supply uses a positive or negative ground, consult the manual for your power supply or contact the manufacturer

WARNING! The antenna used for this radio must be installed at least 8 inches (20 cm) away from all persons. The antenna must not be collocated or used with any other antenna or transmitter.

Connecting external speakers

Your radio supports two external speakers for remote monitoring and public address features. External speakers are sold separately.

Download Uniden PRO520XL CB Radio Manual

Related Posts

Uniden GRANTLT Elimination of Licensing The FCC has ruled that CB Radio Service operators are no longer... 

Uniden PC78ELITE MOBILE STATION ANTENNA Because the maximum power output of the transmitter is limited... 

Uniden PC68XL CONNECTING THE POWER CORDS We recommend connecting the power lead to the Ignition Switch... 

Uniden PRO510AXL Microphone Jack – The operational mode of the CB is controlled by the push-to-talk... 

Uniden PRO510XL The Citizens Band (CB) Radio Service is under the jurisdiction of the FCC. Any adjustments...