Delta Manual

Westinghouse Digital W4207

FCC Compliance Statement

This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or video reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the W4207 HD Monitor and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the Westinghouse Service Center or an experienced technician for assistance.

DVI CONNECTION: Connect a Digital DVI cable from your computer to the W4207 HD Monitor DVI port. Using a 3.5mm mini cable to RCA Red/White (Left/Right) audio converter cable, connect the 3.5mm cable plug into the computer’s AUDIO OUT port and the RCA Red/White cable plug into the DVI AUDIO IN port on the W4207 HD Monitor.

No Power

• Make sure the power cord is securely connected to the AC In jack on the back of
  the W4207 HD Monitor.
• Make sure the AC power cord is securely connected to the AC socket.
• Plug another electrical device (such as a radio) to the power outlet to verify that the
  outlet is supplying the proper voltage.

Main Menu

Using the main menu, you can adjust the Picture, PC, Audio, PIP, and General Setting parameters. To select a sub-menu option, use the ? /? arrow keys on the right side of the W4207 HD Monitor or on the remote control. Then use the 3/4arrow keys to adjust the sub-menu setting. Finally, press the Menu button on the side of the W4207 HD Monitor or the Exit button on the remote control to exit the OSD menu.

Download Westinghouse Digital W4207 User Manual

Related Posts

Westinghouse Digital LTV-27w2 Outdoor Antenna Grounding If an outside antenna or cable system is connected... 

Westinghouse Digital LTV-27w2 Outdoor Antenna Grounding If an outside antenna or cable system is connected... 

Westinghouse Digital LTV-32w6 HD Power Lines An outside antenna system should not be located in the vicinity... 

Westinghouse Digital LTV-32w1 Disclaimer Westinghouse Digital does not recommend the use of any ammonia... 

Westinghouse Digital LTV-40w1 HDC Power Cord Protection Power supply cords should be routed so that they...