Delta Manual

Insert the seat post and seat into the seat post receiver, and then install the trunk rack to the rear of the scooter. Tighten the seat post clamp securely

Charging

Your scooter comes charged out of the carton. We still recommend charging the unit for 6-8 hours prior to it’s first use. We also recommend charging your scooter after each use and prior to storage.

Master Power/Kill Switch

Located on the dash, near the ignition is a master power/kill switch. This switch must be on to operate the scooter and on during charging. This switch will cut all power to the motor.When first plugged in, the charger has two red lights that will illuminate at the same time, indicating that the charging process has started. Once the light on the charger turns green, you may remove the charger and close the safety cap.

BRAKING SYSTEM

The X-360 uses a hub brake system on the rear wheel of the scooter activated by a hand brake lever on the left side of the handlebar. Squeezing the hand brake lever with your left hand activates the rear brake. Make sure to release the HAND THROTTLE GRIP when engaging the brake.

Squeaky Brakes

The brakes may squeak before they are broken in. This is normal and will not affect the function or performance of the brakes. With continued use the squeak should go away.

Download X-Treme Scooters X-Treme X-360 Owner’s Manual

Related Posts

HANDLEBARS Insert Grips into Handlebar T-Frame as shown in fig 3. Be sure that Snap Pins fit into, and... 

Attach the gas tank. Using the two enclosed bolts and nuts, attach the gas tank to the right side of... 

Charger The charger adopted in this product is the specially designed intelligence charger. When charging,... 

TIRES AND WHEELS The X-Treme XG505 uses an identical rim and tires assembly on the front and rear wheels,... 

Electric Machine The electric machine adopted for this vehicle is 24V 100W dedicated continuous current...