Delta Manual

HANDLEBARS

Insert Grips into Handlebar T-Frame as shown in fig 3. Be sure that Snap Pins fit into, and lock, the small holes in the top of the T-Frame. With the handlebars in the upright & locked position, and the rider standing on the plat from with ONE HAND ON THE BRAKE, adjust the Handlebar height to just below the rider’s waistline.

This is accomplished by loosening the Height ad user  (fig. 3) while holding into the handlebars…move the handlebars to the desire d height and tighten Height Adjuster. Be sure Height Adjuster is tight.CHARGING PROCEDURE

In order with charger in hand, locate the Charge Socket under scooter (fig 4). Plug the charger into Charger Socket. Next, plug the charger into a standard 110/220 volt electrical our-loft. Charging temperature 50 to100F. DO NOT OVER-CHARGER-SEE CHART when finished unplug Charger from the wall outlet then scooter and replace cap over the charger socket.

HANDLE OPERATED MECHANICAL BRAKE

The Rear Wheel Brake is activated by clamping handle brake to the Round Brake Pedal (fig 1) located on the handlebars. This Brake is a friction brake…the handler you press the more braking action you will have. This Brake also has a micro switch that disconnects the power to the motor.

Download X-Treme Scooters X-Treme X-500 Owner’s Manual

Related Posts

Insert the seat post and seat into the seat post receiver, and then install the trunk rack to the rear... 

TIRES AND WHEELS The X-Treme XG505 uses an identical rim and tires assembly on the front and rear wheels,... 

Charger The charger adopted in this product is the specially designed intelligence charger. When charging,... 

Attach the gas tank. Using the two enclosed bolts and nuts, attach the gas tank to the right side of... 

Trouble shooting Fail to startGasoline mixed with water, Please replace it. The spark plug has accumulated...